Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2041 / 3946

NOTE: The IPv4 multicast routing table (inet.1) and the IPv6 multicast routing
table (inet6.1) are not supported for this statement.
Default If you do not specify a routing table name with the
routing-table-name
statement, the
software uses the default routing tables, which are
inet.0
for unicast routes and
inet.1
for the multicast cache.
Options routing-table-name —Name of the routing table, in the following format:
protocol [ .identifier ]
• protocol
is the protocol family. It can be
inet6
for the IPv6 family,
inet
for the IPv4
family,
iso
for the ISO protocol family, or
instance-name.iso.0
for an ISO routing instance.
• identifier
is a positive integer that specifies the instance of the routing table.
Default:
inet.0
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
•
passive
•
Creating Routing Tables
1945 Copyright © 2010, Juniper Networks, Inc.
Chapter 73: Configuration Statements for Layer 3 Protocols