Juniper JUNOS OS 10.3 - SOFTWARE, Manual, Page: 1563 / 3946

vlans
Syntax vlans {
vlan-name {
description text-description;
dot1q-tunneling {
customer-vlans (id | range)
layer2-protocol-tunneling all | protocol-name {
drop-threshold number;
shutdown-threshold number;
}
}
filter input filter-name;
filter output filter-name;
interface interface-name {
mapping (native (push | swap) | policy | tag (push | swap));
}
l3-interface vlan.logical-interface-number;
mac-limit number;
mac-table-aging-time seconds;
no-local-switching ;
no-mac-learning ;
primary-vlan vlan-name;
vlan-id number;
vlan-range vlan-id-low-vlan-id-high;
}
}
Hierarchy Level [edit]
Release Information Statement introduced in Junos OS Release 9.0 for EX Series switches.
Options
dot1q-tunneling
,
no-local-switching
, and
primary-vlan
introduced in Junos OS
Release 9.3 for EX Series switches.
Periods (.) in VLAN names introduced in Junos OS Release 9.4 for EX Series switches.
Option
no-mac-learning introduced in Junos OS Release 9.5 for EX Series switches.
Option mapping introduced in Junos OS Release 9.6 for EX Series switches.
Option swap introduced in Junos OS Release 10.0 for EX Series switches.
Description Configure VLAN properties on EX Series switches. The following configuration guidelines
apply:
•
Only private VLAN (PVLAN) firewall filters can be used when the VLAN is enabled for
Q-in-Q tunneling.
•
An S-VLAN tag is added to the packet if the VLAN is dot1q-tunneled and the packet is
arriving from an access interface.
•
You cannot use a firewall filter to assign a routed VLAN interface (RVI) to a VLAN.
•
VLAN assignments performed using a firewall filter override all other VLAN assignments.
Default If you use the default factory configuration, all switch interfaces become part of the VLAN
default
.
1467 Copyright © 2010, Juniper Networks, Inc.
Chapter 62: Configuration Statements for Bridging and VLANs