Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2167 / 3946

show bgp group
Syntax show bgp group
<brief | detail | summary>
<group-name>
<instance instance-name>
<logical-system (all | logical-system-name)>
<rtf>
Syntax (EX Series
Switch)
show bgp group
<brief | detail | summary>
<group-name>
<instance instance-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display information about the configured Border Gateway Protocol (BGP) groups.
Options
none
—Display group information about all BGP groups.
brief | detail | summary —(Optional) Display the specified level of output.
group-name
—(Optional) Display group information for the specified group.
instance instance-name —(Optional) Display information about a particular BGP peer in
the specified instance. The instance name can be master for the main instance, or
any valid configured instance name or its prefix.
logical-system (all | logical-system-name ) —(Optional) Perform this operation on all logical
systems or on a particular logical system.
rtf —(Optional) Display BGP group route targeting information.
Required Privilege
Level
view
List of Sample Output show bgp group on page 2074
show bgp group on page 2075
show bgp group brief on page 2075
show bgp group detail on page 2075
show bgp group rtf detail on page 2076
show bgp group summary on page 2076
show bgp group summary on page 2076
Output Fields Table 258 on page 2072 describes the output fields for the
show bgp group
command.
Output fields are listed in the approximate order in which they appear.
2071 Copyright © 2010, Juniper Networks, Inc.
Chapter 74: Operational Commands for Layer 3 Protocols