![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745478.webp)
Dismantling (cont’d)
25 To remove circlip 145, place the cylinder block on a
press capable of exerting a pressure of at least 100 kgf
(220 lbf) and compress spring 114 by means of a
suitable tubular tool (see Service Tools, Section 1)
pressing on washer 110.
During this operation, protect the machined surface of
the cylinder block with suitable sheeting.
26 Remove circlip 145, followed by washer 110, spring 114
and the second washer 110.
27 Remove shaft 102 complete with inner race of bearing
149.
28 If bearing 149 is to be renewed, press the shaft 102 out
of the bearing inner race. Support the bearing by means
of a suitable tube D (see Service Tools, Section 1).
8 - 9
Section F
Transmission
9803/6410
Section F
8 - 9
Issue 1
Traction Motor
Summary of Contents for JS130
