34 -14
Linear Travel Switching Valve
Dismantling
1
Unscrew and remove cover
1
.
2
Remove 'O’-ring
2
and discard.
3
Withdraw spool
3
.
4
Encase spool in holder and clamp into a vice.
Note:
See page 34 - 4 for details of holders.
5
Slacken and remove locknuts
4
, spring seating washers
5
and spring
6
.
Cleaning, Inspection
1
Clean all parts with clean oil and dry with compressed
air. Inspect all parts.
2
Ensure spool
3
moves smoothly.
3
Check spring
6
has no defects, deformation or wear.
4
Remove slight defects by lapping.
5
Renew damaged or badly worn parts.
Assembly
Assembly is the reverse of the dismantling procedure.
Torque Setting
1
98 Nm (72 lbf ft)
4
25 Nm (18 lbf ft)
Section E
Hydraulics
9803/6410
Section E
34 - 14
Issue 1
Control Valve
JS01240
JS01250
JS01260
Summary of Contents for JS130
