![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745296.webp)
34 - 6
Spool Assemblies
Dismantling
1
Remove socket screws
1
from the valve body.
2
Remove cover
2
.
3
Remove ‘O’-ring and discard.
4
Withdraw spool
3
.
Note:
Identify spools during removal to ensure correct
replacement.
5
Encase spool in holder blocks
4
and clamp into a vice.
Note:
See page 34 - 4 for details of holder.
6
Remove locating screw
5
holding spring guides
6
.
7
Remove spring guides
6
and spring
7
.
Cleaning
1
Clean all parts with clean oil and dry with compressed
air. Inspect all parts.
2
Ensure spool
3
moves smoothly.
3
Check spring
6
has no defects, deformation or wear.
4
Remove slight defects by lapping.
5
Renew damaged or badly worn parts.
Assembly
Assembly is the reverse of the dismantling procedure.
Torque Settings
1
30 Nm (22 lbf ft)
5
60 Nm (44 lbf ft)
Section E
Hydraulics
9803/6410
Section E
34 - 6
Issue 1
Control Valve
JS01000
JS01010
JS01020
JS01030
Summary of Contents for JS130
