![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745430.webp)
93 - 1
Relief Valves
Dismantling
Refer to the sectional drawing on page E/83-1 as a guide to
dismantling and assembling.
Take steps during dismantling to ensure that all the parts are
returned to their original positions.
Clean the parts with a suitable solvent and blow them dry.
Replace all used 'O'-rings
1
If not already done, remove cap
37
(with a 14 mm A/F
hexagonal socket) from the relief assemblies
34
and
remove piston
38
, liner
51
, shim
40
, poppet
43
and
spring
42
.
2
The seat
44
is press-fitted into sleeve
39
. Remove it
using a soft object, taking care not to scratch the seat
face.
Section E
Hydraulics
9803/6410
Section E
93 - 1
Issue 1
Slew Motor
Summary of Contents for JS130
