![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745515.webp)
7 - 2
Replacement
1
Support the sprocket and position it on the gearbox.
Install the bolts and washers, using Loctite 262 on the
bolt threads. Tighten the bolts in a diagonal sequence
to a torque of 267 - 312 Nm (197 - 230 lbf ft, 27 - 31 kgf
m).
2
Remove the wooden blocks. Connect the track link.
3
Apply grease through the check valve to adjust the
track tension (see
Checking/Adjusting the Track
Tension
, Section 3).
Section J
Track and Running Gear
9803/6410
Section J
7 - 2
Issue 1
Drive Sprocket
Summary of Contents for JS130
