![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745427.webp)
92 - 13
22
Lift cover
17
and balance plate
21
by hand and mount
them carefully on housing
25
.
Take care that balance plate
21
and bushings
20
do not
fall out while mounting cover
17
. Align housing
25
and
cover
17
alignment marks which were made before
dismantling.
23
Tighten the cap screws
27
(with a 12 mm A/F
hexagonal socket) which attach cover
17
to housing
25
to a torque of 157 Nm (116 lbf ft).
Section E
Hydraulics
9803/6410
Section E
92 - 13
Issue 1
Slew Motor
Motor Assembly/Cylinder Assembly
Assembly (cont’d)
24
Assembling the Make-up and by-pass valves.
Assemble the check valves
29
and springs
31
in cover
17
and tighten the caps
30
(14 mm A/F hexagonal
sockets) to a torque of 137 Nm (101 lbf ft).
Assemble by-pass valve assembly
28
to cover
17
and
tighten the caps (10 mm A/F hexagonal sockets) to a
torque of 78.65 Nm (58 lbf ft).
25
Insert the relief valve assemblies
34
into cover
17
and
tighten the caps
37
(14 mm A/F hexagonal sockets) to a
torque of 78.65 Nm (58 lbf ft).
Note:
Ensure that the relief valves are replaced in their
original positions.
Summary of Contents for JS130
