5 - 10
Changing the Breaker In-line Filter
Note:
This filter should be changed at the intervals stated in
Service Schedules
or when the visual indicator
X
has
popped up. DO NOT USE THE BREAKER WITH A
BLOCKED FILTER.
1
Prepare the Machine
Position the machine on level ground. Stop the engine.
Remove the starter key.
2
Release Tank Pressure
(See
Releasing Tank Pressure
).
3
Locate the Filter
4
Remove the Oil Filter
Unscrew and remove filter
A
from head
B
.
5
Fit the New Filter
Coat the seal of the new filter with clean hydraulic fluid.
Screw the new filter into head
B
and tighten. Check and
top up the hydraulic fluid level.
Changing the Drain Line Filter
1
Prepare the Machine
Position the machine on level ground. Stop the engine.
Remove the starter key.
2
Release Tank Pressure
(See
Releasing Tank Pressure
).
3
Locate the Filter
4
Remove the Oil Filter
Unscrew and remove filter
A
from head
B
.
5
Fit the New Filter
Coat the seal of the new filter with clean hydraulic fluid.
Screw the new filter into head
B
and tighten. Check and
top up the hydraulic fluid level.
Section 3
Routine Maintenance
9803/6410
Section 3
5 - 10
Issue 1
Hydraulics (continued)
JS02830
Summary of Contents for JS130
