![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745353.webp)
Dipper Ram - Removal
!
!
WARNING
Hydraulic Pressure
Hydraulic fluid at system pressure can injure you. Before
disconnecting or connecting hydraulic hoses, stop the
engine and operate the controls to release pressure
trapped in the hoses. Make sure the engine cannot be
started while the hoses are open.
INT-3-1-11/1
!
!
WARNING
Lifting Equipment
You can be injured if you use faulty lifting equipment.
Make sure that lifting equipment is in good condition.
Make sure that lifting tackle complies with all local
regulations and is suitable for the job. Make sure that
lifting equipment is strong enough for the job.
INT-1-3-7
1
Lower the attachment to the ground, as shown.
2
Place a wooden block under the dipper ram.
3
Stop the engine, remove the key.
Release the tank pressure (see
Releasing the Tank
Pressure
).
73 - 1
Section E
Hydraulics
9803/6410
Section E
73 - 1
Issue 1
Hydraulic Rams
Summary of Contents for JS130
