![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745136.webp)
4 - 11
Revolution Control for Each Mode
The machine is in the standard mode when the key switch is
ON
. This position is 100 rpm less than the
FULL
rotational
position (H mode). Also note the position where it has
decreased by 200 rpm from
FULL
rotation in
L
and
F
modes.
Relation of throttle volume and pulse are shown in diagram
below. Even though the position of throttle volume is the
same, engine RPM varies with each mode.
However, when pressing a mode switch button, the above
four modes can be selected together with their
corresponding engine RPM.
Section C
Electrics
9803/6410
Section C
4 - 11
Issue 1
Engine Control
Summary of Contents for JS130
