![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745245.webp)
14 - 12
Inspection
All parts should be checked for signs of damage or wear,
paying particular attention to the parts detailed below.
Section E
Hydraulics
9803/6410
Section E
14 - 12
Issue 1
Hydraulic Pump/Regulator
art
Piston assembly
6
Cylinder block assembly
4
Valve plates
9
,
10
Swash plates
7
,
8
Retainer plate
11
Retainer holder
12
Shaft
5
Bearings
13
,
14
Oil seal
15
Body
1
Regulator piston
23
Relief valve assembly
56
Servo regulator parts (spool, sleeve,
piston)
Renew if these conditions exist
a
Any sliding part is deeply scratched or has a rough surface.
b
The clearance between any piston and its cylinder is 0.050 mm (0.002 in) or
more.
c
The shoe/ball clearance
X
is 0.39 mm (0.0157 in) or more.
a
Any sliding part is deeply scratched or has a rough surface.
b
The spline is excessively worn or damaged.
a
The cylinder block sliding contact surface is deeply scratched or has a
rough surface.
a
The piston shoe sliding contact surface is deeply scratched or has a rough
surface.
b
Flaking or peeling on the roller bearing
14
contact surface.
a
The sliding surface is deeply scratched, thermally seized or unevenly worn
or has a rough surface.
a
The oil seal
15
contact surface is deeply scratched or has a rough surface.
b
The spline is excessively worn or damaged.
a
Flaking or peeling on the rolling surface.
b
The bearing does not operate smoothly and freely.
a
The lip has been damaged, excessively worn or hardened.
a
The piston and/or its bore is deeply scratched or has a rough surface.
a
Any problem occurs, e.g. the set pressure has been lowered
a
Any sliding part is deeply scratched or has a rough surface.
X
Summary of Contents for JS130
