![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745060.webp)
8 - 4
Changing the Coolant
1
Do Steps 1 and 2 of
'Checking the Coolant Level'
2
Drain the System
Open the radiator drain tap
A
. Remove the cylinder
block drain plug
B
. Remove the expansion bottle cap
(see
Checking the coolant Level
). Let the coolant
drain out.
!
!
CAUTION
Keep your face away from the drain hole when removing
the drain plug.
2-3-3-4
3
Flush the System
If necessary. Use clean water.
4
Refit the Drain Plug
Clean and refit the drain plug
B
, making sure it is tight.
Close the radiator drain tap
A
.
5
Fill the System
Using the necessary mix of clean, soft water and
antifreeze, (see
Coolant Mixtures
) fill via the expansion
bottle cap until the level in the bottle is between the
FULL and LOW marks.
6
Refit the Radiator Pressure Cap
Make sure it is tight.
7
Refit the Expansion Bottle Cap
Make sure it is tight.
8
Check for Leaks
Run the engine for a while to raise the coolant to
working temperature and pressure. Stop the engine.
Check for leaks. Re-check the level in the expansion
bottle and top up if necessary.
Section 3
Routine Maintenance
9803/6410
Section 3
8 - 4
Issue 1
Engine (continued)
Summary of Contents for JS130
