![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745425.webp)
92 - 11
Section E
Hydraulics
9803/6410
Section E
92 - 11
Issue 1
Slew Motor
14
Apply hydraulic oil to the sliding surface around piston
12
and slide it into housing
25
.
Note:
It is difficult to insert piston
12
into the housing due to
O'-rings
11
and
13
. Hold the piston horizontally and push it
into the housing with one movement.
15
Insert the brake unit springs
14
back into brake piston
12
.
Note:
Insert the springs
14
the same order as they were
found during dismantling.
Motor Assembly/Cylinder Assembly
Assembly (cont’d)
16
Mount the bushings
20
with Teflon rings
19
and the
plate springs
18
into the bushing holes in cover
17
.
Note:
Apply a coating of grease to the end faces and
peripheries of the bushings
20
and to the Teflon rings
19
before mounting them, as this helps prevent them from
falling out when the cover is mounted onto the housing.
17
Generously grease the pins
15
and insert into cover
17
.
Summary of Contents for JS130
