![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745285.webp)
33 - 7
Boom Raise (BM) Operation (cont’d)
When pilot pressure is applied to port
br1
, by operating the
right hand joystick controller, spool
B
moves to the left
closing off the neutral gallery, allowing oil from pump
P2
to
enter the gallery
J
. Pilot pressure is also applied to port
C
in
the load holding valve
X
. Check valve
D
opens, causing
piston
E
to open poppet valve
F
, connecting passageways
G
and
H
. Because check valve
K
is closed, ports
G
and
L
are shut off. Oil bleeds from check valve
M
through pilot hole
P
to gallery
J
, causing check valve
M
to open allowing oil to
enter the outlet port
BR1
.
Combined flow from both pumps is achieved when pilot
pressure is applied to port
N
in the logic check valve
Y
. Oil
from pump
P2
flows through gallery
T
. When this pressure
falls below the pressure delivered by pump
P1
to port
R
, the
check valve
S
moves to the left against the spring pressure
and allows oil to flow from port
R
into gallery
T
and to the
outlet port
BR1
.
Section E
Hydraulics
9803/6410
Section E
33 - 7
Issue 1
Control Valve
Summary of Contents for JS130
