34 - 9
Centre Bypass Valve (3 Spool Section)
Dismantling
1
Remove end cap
1
.
2
Remove ‘O’-ring
2
and discard.
3
Withdraw spool
3
.
4
Encase spool in holder and clamp into a vice.
Note:
See page 34 - 4 for details of holder.
5
Slacken and remove locknuts
4
, spring seating washers
5
and spring
6
.
Cleaning, Inspection
1
Clean all parts with clean oil and dry with compressed
air. Inspect all parts.
2
Ensure spool
3
moves smoothly.
3
Check the spring has no defects, deformation or wear.
4
Remove slight defects by lapping.
5
Renew damaged or badly worn parts.
Assembly
Assembly is the reverse of the dismantling procedure.
Torque Settings
1
60 Nm (44 lbf ft)
4
25 Nm (18 lbf ft)
Section E
Hydraulics
9803/6410
Section E
34 - 9
Issue 1
Control Valve
JS01080
JS01100
JS01090
Summary of Contents for JS130
