![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745240.webp)
14 - 7
Section E
Hydraulics
9803/6410
Section E
14 - 7
Issue 1
Hydraulic Pump/Regulator
7
Remove rear swash plate
8
and the assembly
comprising cylinder block
4
, piston assembly
6
, retainer
plate
11
, retainer holder
12
, spring
19
, spring seat
20
and valve plate
10
.
8
Unscrew the four socket head bolts
75
and take out oil
seal case
16
.
Note:
Take care not to damage the oil seal lip with the shaft
spline.
Dismantling (cont’d)
9
Unscrew the six socket head bolts
73
and remove
flange
2
. Then remove the bearings
14
from the swash
plate.
Note:
It may be necessary to lightly tap the flange with a
plastic hammer to assist removal.
10
Remove bearing
13
on the front side, using the bearing
removal tool and the front shaft protection tool (see
Service Tools
, Section 1).
Summary of Contents for JS130
