1
6,7
P
24
25
26
18
JS03250
41 - 3
Section E
Hydraulics
9803/6410
Section E
41 - 3
Issue 1
Remote Control Valve (Services)
Dismantling and Assembly (cont’d)
Assembly
The numerical sequence given previously is a guide to
dismantling. For assembly the sequence should be reversed
noting the following details:
1
Locate retaining plate
18
onto plunger guides
8
and
using the jig, screw knuckle joint into position. Torque
tighten to 30 Nm (3 kgf m, 22 lbf ft).
2
Locate rocker plate
25
and torque tighten to 30 Nm (3
kgf m, 22 lbf ft), until it makes contact with the plungers
11
. Ensure the plungers are not depressed at this stage.
3
Holding the rocker plate
25
in its position, screw down
joint nut
24
. Torque tighten to 30 Nm (3 kgf m, 22 lbf ft).
4
When fitting the body assembly screw
6
torque tighten
to 40 Nm (4 kgf m, 29.5 lbf ft).
Summary of Contents for JS130
