![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745183.webp)
9 - 3
Section C
Electrics
9803/6410
Section C
9 - 3
Issue 1
Fault Finding
Fault Diagnosis (continued)
Judgement
Item
Value
Measure
1. Fuel amount check
-
Refuel
2. Inspection for fuel contaminant
-
Clean, drain
3. Hydraulic oil amount check
-
Refill oil
4. Inspection of hydraulic oil strainer
-
Clean, drain
5. Inspection of oil amount for each reduction gear
-
Refill oil
6. Inspection of engine oil amount (amount in oil pan)
-
Refill oil
7. Coolant amount check
-
Refill water
8. Dust indicator clogging check
-
Clean or replace
9. Inspection for looseness, corrosion of battery terminal and wiring
-
Tighten or replace
10. Inspection for looseness, corrosion of alternator terminal and wiring
-
Tighten or replace
11. Inspection for looseness, corrosion of starter terminal and wiring
-
Tighten or replace
12. Abnormal sound, smell check
-
Repair
13. Oil leakage check
-
Repair
14. Air-bleeding
-
Air bleeding
15. Battery voltage (engine stopped) check
25-26V
Replacement
16. Battery fluid sensor not fitted, fault should not be displayed.
-
Replenish or replace
17. Inspection for discolouration, burning, peeling of wiring
-
Replacement
18. Inspection for wiring clamp removal, sagging
-
Repair
19. Inspection for wet wiring (special attention to wet connector
Disconnect and dry
and terminal)
-
20. Inspection for fuse breakage, corrosion
-
Replacement
21. Alternator voltage check (engine revolution more than 1/2 throttle)
(When battery insufficiently charged, may be about 25V right after
27.5~29.5V
Replacement
starting.)
22. Battery relay making noise (when starter switch is
ON
or
OFF
)
-
Replacement
Start-up Inspection items
Lubricants • Coolants
Electric Equipment
Hydraulic • Mechanical
Equipment
Other Inspection Items
Electricity • Electric Equipment
Summary of Contents for JS130
