![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745247.webp)
14 - 14
Section E
Hydraulics
9803/6410
Section E
14 - 14
Issue 1
Hydraulic Pump/Regulator
3
Assemble the front piston/cylinder block assembly as
follows:
a
Mount spring seat
20
on cylinder block assembly
4
followed by conical spring assembly
19
and retainer
holder
12
.
b
Install piston assembly
6
into retainer plate
11
and
insert the pistons in cylinder block assembly
4
.
4
Pass shaft
5
through cylinder block assembly
4
from
the rear, double splined end first.
Assembly (cont’d)
5
Insert pin
63
into the front side of the pump housing.
Install valve plate
9
, stepped face outermost, so that
the slot on its rear face locates the pin.
6
Install cylinder block
4
/shaft
5
assembly into pump
housing
1
with the piston shoes outermost.
Summary of Contents for JS130
