![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745282.webp)
33 - 4
Dipper (AM) Operation
When pilot pressure is applied to port
bl3
, by operating the
left hand joystick controller, the spool
E
moves to the right
closing off the neutral gallery
F
. Oil from the pump
P1
is
directed to the outlet port
BL3
by lifting check valve
G
. At
the same time, pressure is appiled to the centre bypass
valve
J
. This causes oil from pump
P2
, flowing through the
neutral gallery
F
, to be re-directed into the dipper circuit.
Therefore the high pressure flow from both pumps is used
to raise the dipper. Oil returns to tank via port
AL3
.
When pilot pressure is applied to port
al3
, the reverse
operation occurs.
Section E
Hydraulics
9803/6410
Section E
33 - 4
Issue 1
Control Valve
JS01720
Summary of Contents for JS130
