34 - 10
Foot Relief Valve
Dismantling
1
Remove relief valve sub-assembly
1
.
Note:
Pressure setting is critical - do not dismantle the valve
sub-assembly.
2
Remove ‘O’-ring
2
and discard.
3
Remove screwed plug
3
.
4
Remove ‘O’-ring
4
and discard.
5
Remove socket screws
5
.
6
Remove cover
6
.
7
Remove ‘O’-ring
7
and discard.
8
Withdraw bushing
8
, sleeve
9
, spring
10
, spool
11
,
outer sleeve
12
and spacer
13
.
Cleaning, Inspection
1
Clean all parts with clean oil and dry with compressed
air. Inspect all parts.
2
Ensure spool
11
moves smoothly.
3
Check spring has no defects, deformation or wear.
4
Remove slight defects by lapping.
5
Renew damaged or badly worn parts.
Assembly
Assembly is the reverse of the dismantling procedure.
Torque Settings
1
48 Nm (36 lbf ft)
3
30 Nm (22 lbf ft)
5
48 Nm (36 lbf ft)
Section E
Hydraulics
9803/6410
Section E
34 - 10
Issue 1
Control Valve
JS01100
JS01130
JS01120
Summary of Contents for JS130
