![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745040.webp)
4 - 1
First Aid - Electrolyte
EYES
FLUSH WITH WATER FOR 15 MINUTES. GET MEDICAL
HELP FAST.
IF SWALLOWED
DO NOT INDUCE VOMITING. DRINK LARGE QUANTITIES
OF WATER OR MILK. Then drink milk of magnesia, beaten
egg or vegetable oil.
SKIN
FLUSH WITH WATER. REMOVE AFFECTED CLOTHING.
!
!
WARNING
Batteries give off an explosive gas. Do not smoke when
handling or working on the battery. Keep the battery
away from sparks and naked flames.
Battery electrolyte contains sulphuric acid. It can burn
you if it touches your skin or eyes. Wear goggles.
Handle the battery carefully to prevent spillage.
Keep metallic items (watches, rings, zippers etc) away
from the battery terminals. Such items could short the
terminals and burn you.
Set all switches in the cab to OFF before disconnecting
the battery. When disconnecting the battery, take off the
earth (-) lead first.
When reconnecting, fit the positive (+) lead first.
Re-charge the battery away from the machine, in a well-
ventilated area. Switch the charging circuit off before
connecting or disconnecting the battery. When you have
installed the battery in the machine, wait five minutes
before connecting it up.
5-3-4-3
!
!
CAUTION
Do not disconnect the alternator, the battery, or any part
of the charging circuit with the engine running.
8-3-4-1
Charge Rate Depending on the Battery specific Gravity
If the battery is charged and the charge rate is less than
75%, replace the battery.
Check the Electrolyte Level
1
Open the Battery Compartment A
Remove the bolts securing the metal plate above the
battery. Remove the plate.
2
Check the Level
Remove covers and look at the level in each cell. The
electrolyte should be 6 mm. (0.25 inch) above the
plates. Top up if necessary with distilled water or
de-ionized water.
!
!
WARNING
Do not top the battery up with acid. The electrolyte could
boil out and burn you.
2-3-4-6
3
Check the Connections
Make sure that the terminals are tight and clean. Coat
them with petroleum jelly to prevent corrosion.
Section 3
Routine Maintenance
9803/6410
Section 3
4 - 1
Issue 1
Battery
Temperature
20°C
0°C
-10°C
Charge Rate
100% (satisfactory)
1.26
1.27
1.28
90% (satisfactory)
1.24
1.25
1.26
80% (charge)
1.22
1.23
1.24
75% (charge)
1.21
1.22
1.23
Summary of Contents for JS130
