![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745294.webp)
Key
A
70 - 100 mm (2.7 - 3.9 in)
B
3 - 6 mm (0.12 - 0.24 in)
C
30 - 40 mm (1.18 - 1.57 in)
D
22 mm (0.87 in)
34 - 4
Dismantling and Assembly (cont’d)
Note:
1
Ensure all work surfaces are clean.
2
Discard and renew all seals, ‘O’-rings and back-up
rings.
3
Lubricate all new seals and ‘O’-rings on assembly,
using a suitable grease or clean hydraulic oil and
ensure seals are firmly and correctly seated.
4
During dismantling, ensure all components are clearly
identified to assist assembly.
5
Handle components and sub-assemblies with care,
they are precision made and are easily damaged.
6
Prior to assembly, all components should be liberally
coated with hydraulic oil to ensure full movement
between moving parts.
7
Ensure screws and bolts are tightened to the correct
torque figures to prevent distortion of parts.
8
After dismantling, use a suitable solvent to clean all
components, dry using compressed air.
9
Torque tightening values in assembly procedures are for
threads lubricated with hydraulic oil.
11
To prevent surface damage when working on spools,
ensure they are encased in protective wooden blocks
as detailed opposite.
Section E
Hydraulics
9803/6410
Section E
34 - 4
Issue 1
Control Valve
JS01510
Summary of Contents for JS130
