![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745424.webp)
92 - 10
10
Mount the outer ring of the taper roller bearing into
housing
25
.
11
Hold the end of cylinder
24
by hand and carefully insert
the cylinder assembly into housing
25
. Use the seal
protector on the splines.
Note:
The splines of the cylinder assembly protrude beyond
the housing, so use a guide of 30-50 mm (1.2-1.9 in) on the
lower part of the housing. Verify that spring
5
is inserted
correctly into the back face of retainer plate
7
.
Section E
Hydraulics
9803/6410
Section E
92 - 10
Issue 1
Slew Motor
Motor Assembly/Cylinder Assembly
Assembly (cont’d)
12
Mount friction plate
9
and mating plate
10
.
Note:
Apply hydraulic oil to both faces before mounting the
plates.
13
Mount 'O'-ring
11
in housing
25
and 'O'-ring
13
on
piston
12
.
Note:
Grease the 'O'-rings before mounting.
Summary of Contents for JS130
