![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745432.webp)
94 - 1
1
Removal of the sun gear, 1st stage holder assembly.
Remove sun gear
66
and 1st stage holder assembly
65
.
!
WARNING
Metal Splinters
You can be injured by flying metal splinters when driving
metal pins in or out. Use a soft faced hammer or drift to
remove and fit metal pins. Always wear safety glasses.
INT-3-1-3
2
Remove the spur gear and 2nd stage holder assembly
76
.
Section E
Hydraulics
9803/6410
Section E
94 - 1
Issue 1
Slew Motor
Reduction Gear
Dismantling
Refer to the sectional drawing on page E/83-2 as a guide to
dismantling and assembling.
3
Dismantling of the 1st stage holder assembly.
Drive the spring pins into shaft
67
.
Note:
The spring pins cannot be reused.
4
Support planetary gears
69
by hand and withdraw shaft
67
from holder
65
.
Summary of Contents for JS130
