![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745254.webp)
Axial Piston Pumps
JS130
JS160
Maximum Displacement
cc (in
3
)/rev
55 ( 3.36) x 2
60 (3.66) x 2
Working pressure bar (lbf/in
2
)
set
TBA
maximum
343 (4974)
343 (4974)
Rated Speed
rpm
2030
2330
Maximum flow
l (UK gal)/min
112 x 2 (24.6 x 2)
140 x 2 (30.8 x 2)
18 - 1
Section E
Hydraulics
9803/6410
Section E
18 - 1
Issue 1
Hydraulic Pump/Regulator JS130, JS160
Introduction
The pump/regulator consists of two variable displacement
type axial piston pumps (P1 and P2) supplying pressurised
oil to operate machine functions, plus one gear type pilot
pump, (Pp) to provide pilot circuit pressure for operator
control of machine functions.
Pumps P1 and P2 each incorporate a regulator which
adjusts the output flow rate according to system demand.
Gear Pump
JS130
JS160
Displacement cc
(in
3
)/rev
10.0 (0.66)
10.0 (0.66)
Maximum pressure (relief)
bar (lbf/in
2
)
39 (566)
39 (566)
Maximum flow
I (UK gal)/min
20 (4.4)
23 (5.0)
Specifications
Summary of Contents for JS130
