jcb JS130, Service Manual

Page: 439 / 533

94 - 8
11 Holder assembly 65 mounting
a Insert planetary gear 69 and the thrust plate into
holder 65 and insert shaft assembly 67 .
Note: Apply gear oil to the spur gear internal surface and
shaft assembly outer surface.
b Drive in the spring pin.
Note: Drive in the pins with the splits facing towards
planetary gear 69 .
!
WARNING
Metal Splinters
You can be injured by flying metal splinters when driving
metal pins in or out. Use a soft faced hammer or drift to
remove and fit metal pins. Always wear safety glasses.
INT-3-1-3
12 Holder assembly 76 and spur gear mounting
Section E Hydraulics
9803/6410
Section E
94 - 8
Issue 1
Slew Motor
Reduction Gear
Assembly (cont’d)
a Carefully lower holder assembly 76 so that it
meshes correctly with the internal teeth of ring gear
64 .
Turn the holder assembly slightly to engage the
splines of pinion shaft
53 .
b Insert the sun gear 77 so that the teeth mesh with
planetary gears 72 .