![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745239.webp)
14 - 6
Section E
Hydraulics
9803/6410
Section E
14 - 6
Issue 1
Hydraulic Pump/Regulator
3
Unscrew the two bolts
77
and remove gear pump
57
.
4
Unscrew the four socket head bolts
74
. Remove sub-
block assembly
50
and put to one side.
Dismantling (cont’d)
5
Unscrew the six socket head bolts
73
and remove rear
cover
3
. Then remove bearings
14
from the swash
plate.
Note:
It may be necessary to lightly tap the rear cover with a
plastic hammer to assist removal.
6
Remove bearing
13
on the rear side, using the bearing
removal tool and the rear shaft protection tool (see
Service Tools
, Section 1).
Summary of Contents for JS130
