![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745329.webp)
46 - 3
Section E
Hydraulics
9803/6410
Section E
46 - 3
Issue 1
Remote Control Valve (Travel)
7
Remove plunger assembly
28
from cover
6
. Remove
‘O’-ring
25
and discard.
Note:
Avoid scratching surfaces when removing ‘O’-rings.
8
Withdraw spool assembly from valve body
3
.
Note:
Record spool locations to ensure correct reassembly.
Dismantling and Assembly (cont’d)
Dismantling (cont’d)
9
Note:
The spool assembly is pre-adjusted with shim
15
and should not be dismantled unless necessary. If parts
are damaged or badly worn do the following:
Using soft metal pads, clamp spool
4
into a vice,
slacken and remove screw
18
. Remove sleeve
5
, shims
1
,
2
and spring
11
.
10
Dismantled parts.
Summary of Contents for JS130
