6 - 3
Removal and Replacement (cont’d)
Removal (cont’d)
8
Support the motor so that the cables are in tension,
then remove the motor installation bolts.
Replacement
1
Before fitting, clean the assembly and bleed air out as
follows:
Turn the assembly so that the hydraulic oil ports are
facing upwards.
Remove plugs from ports
A
and
B
. Fill the motor
through port
A
with the specified hydraulic oil. Fit
plugs to ports
A
and
B
.
2
Lift the assembly and position it on the undercarriage.
Install the bolts and washers, using Loctite 262 on
the bolt threads. Tighten the bolts in a diagonal
sequence.
Torque Settings
267-312 Nm (196-229 lbf ft)
3
Remove the plugs and connect the motor hoses.
Section F
Transmission
9803/6410
Section F
6 - 3
Issue 1
Traction Motor/Reduction Gear
Summary of Contents for JS130
