Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 221 / 797

Connectivity & Network Setup
221
To
ols
5

Text String Added to User Name
Enter text strings for [Text String Added to User Name] when you use additional text strings.
Up to 64 characters are allowed.
When [Use Added Text String] is set to [Enabled], enter the corresponding fixed text string.
For Example:
When "mail" is set for [Attribute of Typed User Name] and the information registered for the
target user is "mail@myhost.example.com," you will need to enter
"mail@myhost.example.com".
However, if [Use Added Text String] is set to [Enabled] and "@myhost.example.com" is
specified for [Text String Added to User Name], you will only need to enter "mail" from the
control panel because the machine adds "@myhost.example.com" to the end of the string.

Attribute of Smart Card (ApeosPort Series Models Only)
When a smart card is used for LDAP authentication, set the attribute of the card ID to
perform a search on the LDAP server to authenticate the user who has the card. Up to 32
characters are allowed.
Note • This item is displayed when [Smart Card Link Mode] under [Tools] > [Authentication/Security
Settings] > [Authentication] > [User Details Setup] is set to [No Passcode Required].

Network User ID Attribute (ApeosPort Series Models Only)
When a smart card is used for LDAP authentication, set the attribute of the user name to be
used for a smart card ID search. The user name is given to the remote service as the
authentication information. Up to 32 characters are allowed.
Note •
This item is displayed when [Smart Card Link Mode] under [Tools] > [Authentication/Security
Settings] > [Authentication] > [User Details Setup] is set to [No Passcode Required].

Login Credentials to Search Entries
Select which users are allowed to search the Address Book.
You can select from [Remotely Authenticated User] and [System].

Login Name
Set a user name for the Address Book search and access the directory server using
[Authentication of User Attributes] method for LDAP authentication. Set this item only
when authentication is required for the search for the directory service. Up to 255 characters
are allowed.

Password
Set a login password for the user specified in [Login Name]. Up to 32 characters are allowed.

Search Directory Root
Enter a search root character string with up to 255 characters.

Scope of Search from Root Entry
Select the search range from the root entry.
 Root entry only
Searches the root level only.
 One level below root entry only
Searches from the root level to one level below the root level.

All levels below root entry
Searches from the root level to all lower levels below the root level.