Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 746 / 797

16 Appendix
746
A
ppe
n
d
ix
16
Notes and Restrictions on the Use of the Copy Feature

Copy Feature
The machine does not offer the Improves Fit feature.

Meter Count for Dual Color and Single Color Copies
Dual color and single color copies are counted as color copies.

Color Effect for Dual Color Copy
To extract colors for dual color copy, adjusting the colors of the document is required in
advance.
Our service representative performs the adjustment. Contact our Customer Support Center.

Auto Contrast
The machine does not offer the [Auto Contrast] feature for [Color Effects].

Pages per Side for Black & White and Color Mixed Documents and Meter Count
If you copy a document that contains black & white and color pages by specifying [Pages
per Side], an output sheet that has both black & white and color pages will be counted as a
color page.

Copy and Simple Copy
You cannot switch the screen between the Copy and Simple Copy services. Return to the
Services Home screen, and then select a service. In that case, the settings specified in either
service are cleared.

ID Card Copy
 The machine does not shift the ID card image to the center of the output in any
magnification ratio and image size you specified.
 When the reduced size is specified to copy an ID card, the machine may copy the ID card
in a different orientation from the original orientation depending on the magnification
ratio specified.
Notes and Restrictions on the Use of the Print Feature

Output of Long Feed Documents
The output of long feed documents is not supported.

PostScript Driver
Some options such as Poster (Photo Enlargement) are not supported by the PostScript driver.
With the Pages Per Side (N-Up) feature, you can specify 2, 4, 6, 9, or 16 pages up, and with
or without frame borders.

Printing from Macintosh via USB Connection
When you send a print job from the PostScript driver of Macintosh connected via USB and
the job includes application data with graphic data (EPS file including binary data) pasted,
the machine may misidentify the binary data as protocol data; therefore, the output of text
data may extend for multiple pages.
In this case, select [RAW] for [Adobe Communication Protocol] under [Tools] > [System
Settings] > [Connectivity & Network Setup] > [Port Settings] > [USB] to properly print data
which includes EPS files with binary data.