Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 727 / 797

HP-GL/2 Emulation
727
A
ppe
n
d
ix
16
No. of prints 108 Sets the number of copy to be printed.
[1] - [250] (Default: 1) : 1 - 250
Output
destination 109 Sets the output tray for the printouts.
[0] (Default) : Right Top Tray
[80]
: Right Middle Tray (optional)
2 sided printing 110 Sets 2 sided printing.
[0] (Default) : None
[1]
: Head to head
[2] : Head to toe
Alphanumeric
fonts 112 Sets the font for single-byte characters.
For more information on fonts, refer to "Internal Fonts" (P.657).
[0] (Default) : Stroke
[1]
: Roman
[2] : Sans serif
Position
adjustment 113
(Vertical
position
adjustment)
Adjusts the hard clip area vertically or horizontally. You can set from -250 mm
to +250 mm in 1 mm increments.
[0] (Default) : Does not move the hard clip area.
[1] - [250]
: -250 to -1 mm
[251] - [500] : +1 to +250 mm
Important • Data outside the printable area is not printed regardless of the adjustment
of the print position. In addition, data moved outside the printable area as
a result of adjusting the print position is not printed.
114
(Horizontal
position
adjustment)
Number of sets 115 Sets the method for specifying the print sets.
[0] (Default) : Protocol
[1]
: Panel
[2] : Command
Parameter Item No. Value