Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 386 / 797

12 Using the Server Fax Service
386
Usin
g
t
h
e Serv
er
F
a
x Ser
v
ic
e
12
Step 2 Setting the Server Fax Feature
Enable the Server Fax feature and set the file destination. The following procedure explains
how to set them on CentreWare Internet Services.
For more information on how to use CentreWare Internet Services, refer to "Configuring Machine Settings Using
CentreWare Internet Services" (P.325).
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address box on the browser,
and then click [Enter].
 Example of the IP address entry
http://192.0.2.1/ (IPv4)
http://[2001:DB8::1234] (IPv6)
 Example of the Internet address entry
http://myhost.example.com/
Note • When specifying a port number, add “:” and the port number to the end of the Internet address.
3
Click the [Properties] tab.
4
Click [Services] to display the items in the folder.
5
Click [Fax] to display the items in the folder.
6
On the tree in the left frame, click [General].
7
On the [General] screen, click [Edit].
8
Set Optional Information such as [Job Log] and [Confirmation Sheet].
9
Click [Apply] to enable the settings.
10
On the tree in the left frame, click [Fax Repository Setup].
11
On the [Fax Repository Setup] screen, select a protocol and then set the items under [Fax
Destination].
Note •
When [FTP] or [SMB] is selected, faxes will be sent to the destination specified under [File
Destination]. When [SMTP] is selected, faxes will be sent to the destination specified in the E-mail
settings.
For more information on this setting, refer to the help of CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the internet. The communication fee shall be borne by you.

When [FTP] or [SMB] is selected
Set the repository server that is to be used for the Server Fax feature.
 IP Address/Host Name and Port (If the port number is blank, the default port number
(FTP:21 or SMB:139) will be used.)
 Share (SMB only)
 Document Path
 Login Name
 Password

Retype Password