Fuji Xerox ApeosPort-V C5580 Administrator'S Manual Download Page 465

Page: 465 / 797

Trouble during Scanning

465

Pro

lem

So
lv

Unable to Import Scanned Documents to the Computer

If you cannot import scanned documents to the computer, identify the symptom in the
following table to perform the remedy.

Symptom

Cause

Remedy

Unable to find the
scanner.

The machine is not turned on. Switch the main power and power on.

The network cable is
disconnected from the
computer.

Connect the network cable to the computer.

The network cable is
disconnected from the
machine.

Connect the network cable to the machine.

Refer to "Interface Cables" (P.21).

The network between the
computer and machine is
abnormal.

Check with your network administrator.

Unable to open a
folder.

The folder is unregistered.

Refer to "Create Folder" (P.279).

The folder passcode has been
forgotten.

The passcode cannot be retrieved. Set the
passcode to [Off], and then set the passcode
again.

Refer to "Create Folder" (P.279).

Unable to import
data from the
scanner because
of a TWAIN
transmission error.

The scan driver is not
installed.

Install the scan driver.

Operation
terminates during
scanning.

The file size is too large.

Lower the resolution, and import again.

Refer to "5 Scan" > "Layout Adjustment" in the User
Guide.

A Transmission
Report - Job
Undelivered is
output.

Unable to transmit because
of the error.

Check the Transmission Results in the
Transmission Report - Job Undelivered. If an
error code is displayed, refer to "Error Code"
(P.479).

Summary of Contents for ApeosPort-V C5580





























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-V C5580

Reviews:

Related manuals for ApeosPort-V C5580

Brands by name

Popular brands

Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Search results

Summary of Contents for ApeosPort-V C5580

Reviews:

Related manuals for ApeosPort-V C5580

Brands by name

Popular brands