Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 771 / 797

Notes and Restrictions
771
A
ppe
n
d
ix
16

When you change Login Type to or from [Login to Remote Accounts], user information,
private folders, and job flow Sheets registered on the machine will be deleted.
 ApeosWare Authentication Management and ApeosWare Authentication Agent do not
support the feature to automatically obtain the certificate of the authenticated users
from a remote server.

Remote Authentication and ApeosWare Authentication Management or ApeosWare
Authentication Agent (ApeosPort Series Models Only)
 The remote authentication server that ApeosWare Authentication Management or
ApeosWare Authentication Agent can use is Active Directory only.
 Color Access is available but the limit for the maximum number of pages is not available.

Remote Authentication using the Smart Card
 Remote Authentication can be performed in an environment where ApeosWare
Authentication Management, ApeosWare Authentication Agent, Active Directory, or the
combination of ApeosWare Authentication Management and Active Directory or
ApeosWare Authentication Agent and Active Directory is used.
 Change the default realm name only when you want to use a different realm name.
Notes and Restrictions for Using SMB
This section describes notes and restrictions to observe when using SMB.

Configuration on the Machine

IP addresses are managed for the entire system. Configure the settings only after
consulting your network administrator.
 The setting of subnet mask and gateway addresses may be required depending on the
network environment. Consult your network administrator and configure the required
settings.

Configuration on the Computer
 IP addresses are managed for the entire system. Configure the settings only after
consulting your network administrator.

When setting the network such as IP addresses with a host used under the Network
Information Service (NIS), consult your NIS administrator.

SMB Authentication
When an IP address or a host name is used to designate the authentication server for SMB
authentication, even if the domain name is incorrect, the authentication succeeds if the
correct user name and passcode are entered.
Notes and Restrictions for Using TCP/IP
This section describes notes and restrictions to observe when using TCP/IP (LPD).

Configuration on the Machine
 IP addresses are managed for the entire system. Configure the settings only after
consulting your network administrator.