Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 558 / 797

15 Problem Solving
558
Pro
b
lem
So
lv
in
g
15
033-556 [Cause] The password sent to the other machine did not match the password for receiving faxes
on the other machine.
[Remedy] If necessary, check whether the correct machine password has been instructed to the
other machine.
033-557
[Cause] The number of services or of recipients exceeds the maximum limit.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
recipients, and then send again.
033-558 [Cause] The machine is set to reject faxes without a remote ID, and a remote ID was not sent
from the other machine.
[Remedy] Ask the sender to set a remote ID. If necessary, set the machine to receive even when a
remote ID is not sent.
033-559 [Cause] The authentication ID is incorrect.
[Remedy] An error occurred during operation of the maintenance system by Fuji Xerox. When the
communication line is available, contact our Customer Support Center.
033-560
033-561
033-562 [Cause] An error occurred during remote maintenance work.
[Remedy] This is an error occurring during remote maintenance work by Fuji Xerox. No measure is
required.
033-563 [Cause] Paper that can print faxed documents is not loaded in a tray.
[Remedy] Take one of the following measures:

Specify the paper size.

Confirm whether the paper tray is set correctly.
033-564 [Cause] The machine was turned off during communication.
[Remedy] Wait for a while, confirm the fax service settings and the fax number, and then send
again if sending. If the error still is not resolved, contact our Customer Support Center.
033-565 [Cause] Cannot send because too many recipients are specified.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
recipients, and then send again.
033-566 [Cause] Cannot send because the recipient (fax number) is not specified.
[Remedy] Correctly specify the recipient's fax number.
033-567 [Cause] The recipient (fax number) is incorrect.
[Remedy] Correctly enter the recipient's fax number, and execute the operation again.
033-568 [Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If receiving, ask the sender to send again. If the error still
is not resolved, contact our Customer Support Center.
033-569 [Cause] Paper in the tray is not loaded in the direction that the received fax data can be printed.
[Remedy] Load paper in Tray 5 according to the direction displayed on the screen.
033-570 [Cause] The machine was turned off during communication.
[Remedy] Wait for a while, confirm the Fax service settings and the fax number, and then send
again if sending. If the error still is not resolved, contact our Customer Support Center.
033-571 [Cause] Cannot use the Fax service because of causes such as memory is insufficient.
[Remedy] Cancel the fax data in the queue, or wait for a while, and execute the operation again.
033-572 [Cause] The data received is not printed.
[Remedy] No measure is required. The data will be printed after a while.
Error Code Cause and Remedy