Fuji Xerox ApeosPort-V C5580 Administrator'S Manual Download Page 467 | Manualshive

Page: 467 / 797

background image

Trouble during Scanning

467

Pro

b

lem

So
lv

in

g

15

Unable to Send E-mail

If you cannot send a scanned document using the E-mail feature, identify the symptom in
the following table to perform the remedy.

The Image is not What was Expected

If the image is not what was expected, identify the symptom in the following table to
perform the remedy.

Symptom

Cause

Remedy

A Transmission
Report - Job
Undelivered is
output.

Unable to transmit because
of an error.

Check the Transmission Results in the
Transmission Report - Job Undelivered. If the
error code is displayed, refer to "Error Code"
(P.479).

Unable to send e-
mail.

The mail address is incorrect.

Enter the correct mail address.

The data size exceeded the
maximum e-mail size.

Change the maximum e-mail size, or lower
the resolution.

Refer to "Maximum Total Data Size" (P.262), or "5 Scan"
> "Layout Adjustment" in the User Guide.

Symptom

Cause

Remedy

The image is dirty. The document glass or the

document cover is soiled.

Clean the document glass or the document
cover.

Refer to "Cleaning the Document Cover and Document
Glass" (P.94).

The document is a
transparent type such as a
transparency film.

If the document is transparent, dirt on the
document cover may be copied on the image.
Place a white sheet of paper on top of the
document when scanning.

The document is colored,
rough, or a blueprint.

Adjust the copy density or image quality
when scanning.

The document is glossy
printing paper.

Glossy printing paper easily sticks to the
document glass, and shadows are sometimes
scanned, soiling the image. Place a
transparency film under the document when
scanning.

The image is too
dark, or too light.

The scan density is set to
[Darken] or [Lighten].

Adjust the scan density.

Refer to "5 Scan" > "Advanced Settings" in the User
Guide.

The setting for [Original Type]
is inappropriate for the
document.

Select the image quality appropriate for the
document.

Refer to "5 Scan" > "Advanced Settings" in the User
Guide.

Part of the image
is missing.

The document is pasted or
folded.

The pasted or folded section may not be
laying flat on the document glass. Place a
stack of white sheets on top of the document
to flatten the document against the
document glass.

«
...
465
466
467
468
469
...
»

Summary of Contents for ApeosPort-V C5580






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V C5580

Brand: Samsung Pages: 347

SCX 6555N - MultiXpress Mono Multifunction

Brand: Samsung Pages: 180

SCX-4300 - SCX 4300 B/W Laser

Brand: Samsung Pages: 18

SCX-4521FG - B/W Laser - All-in-One

Brand: Samsung Pages: 215

SCX 6320F - B/W Laser - All-in-One

Brand: Samsung Pages: 332

SCX 4828FN - Laser Multi-Function Printer

Brand: Samsung Pages: 248

SCX 4725FN - B/W Laser - All-in-One

Brand: Samsung Pages: 253

ML 2851ND - B/W Laser Printer

Brand: Samsung Pages: 179

ML 2510 - B/W Laser Printer

Brand: Samsung Pages: 84

ML 1740 - B/W Laser Printer

Brand: Samsung Pages: 152

ML 1630 - B/W Laser Printer

Brand: Samsung Pages: 142

ML 1630 - B/W Laser Printer

Brand: Samsung Pages: 82

Brand: Samsung Pages: 2

Brand: Samsung Pages: 384

Lazett Combo SCX-4216F

Brand: Samsung Pages: 135

Brand: Samsung Pages: 414

SCX 6555N - MultiXpress Mono Multifunction

Brand: Samsung Pages: 112

scx-4100 series

Brand: Samsung Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands