Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 157 / 797

Common Service Settings
157
To
ols
5
between 182 and 457 mm and the Y (length) between 140 and 320 mm in 1 mm
increments.
When using Tray 6 (HCF (2000 sheets)), you can load standard size paper only. Select
[Auto Size Detect].
For Tray 6 (HCF B1), you can load both standard size paper and non-standard size paper.
When you load non-standard size paper, select [Custom Size], and then set the size in the
X (width) between 100 and 330 mm and the Y (length) between 148 and 488 mm in 1
mm increments.

Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
 Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto
Paper selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is
automatically selected by the machine for copying or printing.
Customize Paper Supply Screen
Select whether the setting items specified in [Paper Size] or [Auto Paper Select] in [Paper
Tray Attributes] are to be displayed on the [Paper Supply] screen.

Disabled
Does not display the items specified in [Paper Size].

Size Detection
Displays the setting in [Paper Size].

Usage (Auto Paper Select)
Displays the setting in [Auto Paper Select].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
Paper Tray Attributes During Loading
Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Trays 1 to 4 and 6 (optional). You cannot apply this setting to Tray 5.
Paper Tray Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays or print data does not include the paper tray information for
automatic tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
This setting applies to Trays 1 to 4 and 6 (optional). You cannot apply this setting to Tray 5.
Note •
When a logical printer is used and if you specify the paper tray with the print driver, this setting will
be ignored.