Fuji Xerox ApeosPort-V C5580 Administrator'S Manual Download Page 549

Page: 549 / 797

Error Code

549

Pro

lem

So
lv

027-728

[Cause]

The number of files that are to be sent to external services exceeded the maximum
number.

[Remedy] Reduce the number of files, and send them again.

027-730

[Cause]

The number of the document pages attached to the SMTP mail exceeds the maximum
number of pages allowed for the Split Send feature.

[Remedy] Increase the number of pages allowed for the Split Send feature, or reduce the number

of the document pages.

027-731

[Cause]

An error occurred in the machine.

[Remedy] After the scanning for Network Scanning completes, execute the operation again.

027-732

[Cause]

The Network Scanning server is full, or a server disk error occurred.

[Remedy] Check the amount of available disk space. If the disk space is sufficient and the error still

is not resolved, check the status of the disk of the server.

027-733

[Cause]

The SSL setting on the Network Scanning server is disabled.

[Remedy] Enable the SSL setting of the Network Scanning server.

027-734

[Cause]

The certificate of the server used for Network Scanning is not set correctly.

[Remedy] Check the followings:



The Network Scanning server is accessible from your computer using HTTPS protocol.



The SSL server certificate of the Network Scanning server is registered on the machine.



The SSL server certificate of the Network Scanning server is correct.



When the certificate is not registered on the Network Scanning server, disable the
server certificate validation feature of the machine.

027-735

[Cause]

The data transfer using SSL is specified, but the SSL setting of the machine is disabled.

[Remedy] Enable the SSL setting, or specify HTTP for the transfer protocol.

027-736

[Cause]

The server certificate verification feature of the machine is disabled when the server
certificate verification is required.

[Remedy] Enable the server certificate validation. Or, disable the server certificate validation for

data transfer.

027-737

[Cause]

An error occurred while reading data from the pool server for job templates.

[Remedy] Check on the directory where the job templates are stored, and confirm whether the

settings including the access privilege are correct.

027-739

[Cause]

A specified pool server for job templates cannot be found.

[Remedy] Confirm the path name of the pool server for job templates.

027-740

[Cause]

[Remedy] Confirm whether the login user name and the login password are correct.

027-741

[Cause]

Unable to connect to the pool server for job templates.

[Remedy] Consult your network administrator for the network environment and the server

configuration.

027-742

[Cause]

The capacity of the hard disk is insufficient and job templates cannot be stored.

[Remedy] Delete unnecessary data from the hard disk to free up disk space.

027-743

[Cause]

The settings of the pool server for job templates is not correct.

[Remedy] Confirm whether the settings of the pool server for job templates are correct.

Error Code

Cause and Remedy

Summary of Contents for ApeosPort-V C5580





























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-V C5580

Reviews:

Related manuals for ApeosPort-V C5580

Brands by name

Popular brands

Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Search results

Summary of Contents for ApeosPort-V C5580

Reviews:

Related manuals for ApeosPort-V C5580

Brands by name

Popular brands