Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 228 / 797

5 Tools
228
To
ols
5

IEEE 802.1X Settings
Configure the IEEE 802.1X settings.
 IEEE 802.1X
Set whether or not to use IEEE 802.1X authentication.

Authentication Method
Select from [EAP-MD5], [EAP-MS-CHAPv2], [PEAP/MS-CHAPv2], and [EAP-TLS].
 Login User Name
Enter the login user name with up to 128 characters.
 Login Password
Enter the login password with up to 128 characters.
 Server Certificate Verification
Select whether or not to verify a server certificate when [PEAP/MS-CHAPv2] is selected in
[Authentication Method].
Certificate Revocation Retrieval Settings
Configure the settings for certificate revocation retrieval.

Level of Certificate Verification
Select a level of certificate verification from [Low], [Medium], or [High].
Selecting [Low] does not verify the validity of certificates.
Selecting [Medium] verifies the validity of certificates. If a certificate cannot be verified
because of a network error or any other problems, the certificate is determined as valid.
Selecting [High] verifies the validity of certificates, and determines only certificates that
have not been revoked as valid.

Retrieval of Certificate Status
Select the method to verify the validity of certificates. Select [By Retrieving CRL] if the
machine retrieves a CRL (Certificate Revocation List) from the validation authority to verify
the revocation status of the certificate. Select [By OCSP] if the machine uses OCSP (Online
Certificate Status Protocol), which can verify the validity revocation status of the certificate,
to have the certificate authority or validation authority check the revocation status.

Auto Retrieval of CRL
Select whether or not to automatically retrieve a CRL.

CRL Retrieval Time-Out
Specify a time-out value to retrieve a CRL from 5 to 60 seconds in 1 second increments.

Send Query to OCSP Responder With
Select how to access an OCSP responder from [URL as Specified in Certificate] or [URL as
Specified by Administrator].

URL of OCSP Responder
Enter the URL of an OCSP responder when [URL as Specified by Administrator] has been
selected for [Send Query to OCSP Responder With]. Up to 255 characters are allowed.

OCSP Communication Time-Out
Specify a time-out value for communication between the OCSP responder and the machine
from 5 to 60 seconds in 1 second increments.