Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 539 / 797

Error Code
539
Pro
b
lem
So
lv
in
g
15
026-702 [Cause] The number of accesses from the LDAP server to the machine by Address Book
operation exceeded the machine's processing capability.
[Remedy] Wait for a while and execute the operation again. If the error still is not resolved, contact
our Customer Support Center.
026-703
[Cause] Authentication is canceled when adding documents during faxing or scanning.
[Remedy] Authenticate when adding documents.
026-704 [Cause] An error occurred during processing DocuWorks documents.
[Remedy] Print using the print driver (PCL, etc.) from DocuWorks Viewer.
026-705 [Cause] Unable to process for DocuWorks documents because of insufficient memory space.
[Remedy] Change the [Image Quality] setting from [High Resolution] to [High Quality]. If the error
still is not resolved, print using the print driver (PCL, etc.) from DocuWorks Viewer.
026-706
[Cause] Attempted to print a DocuWorks document of which printing is prohibited.
[Remedy] Release the print prohibited settings using DocuWorks Viewer, and then execute the
operation again.
026-707 [Cause] When processing password-protected DocuWorks documents, the password entered
does not match that of the DocuWorks document.
[Remedy] Set the correct password on ContentsBridge.
026-708 [Cause] Exceeded the maximum limit for the scan data size that can be stored for one job with
Store & Send Link.
[Remedy] Take one of the following measures:
1)Reduce the resolution (scan quality) of the scan parameters and execute the
operation again.
2)Reduce the image with magnification of the scan parameters (such as A3 > A4) and
then execute the operation again.
3)If [Store & Send Link - Maximum File Size] is set to a small value, increase the value.
026-709 [Cause] The capacity of the hard disk that can be used to store scan data with Store & Send Link
is insufficient.
[Remedy] Wait around one day, and when capacity becomes available as a result of the
automatic deletion of files, execute the operation again.
026-710 [Cause] The machine has received and e-mail encrypted by S/MIME, but does not support the
encryption method.
[Remedy] Take one of the following measures:

Ask the sender to send the e-mail encrypted by 3DES.

Disable the FIPS140 validation mode of the machine.
026-711
[Cause] Exceeded the maximum size allowed for a multi-page file when scanning.
[Remedy] Take one of the following measures:
1)Reduce the resolution (scan quality) of the scan parameters and execute the
operation again.
2)Reduce the number of document pages and then execute the operation again.
The maximum size is 2 GB for TIFF, XPS, and PDF, and 1 GB for XDW.
Note • XPS stands for XML Paper Specification.
026-712 [Cause] An error occurred while operating from CentreWare Internet Services.
[Remedy] Retry after waiting for a while.
Error Code Cause and Remedy