Fuji Xerox ApeosPort-V C5580 Administrator'S Manual Download Page 392

Page: 392 / 797

13 Encryption and Digital Signature Settings

392

En
cr

yp
ti

ign
at

* : For Windows, open the certificate file and check [Valid From] on the [Advanced] tab.

Encryption Features for Communication

The data sent between the machine and computers on a network can be encrypted.



Encrypting HTTP Communications from a Client to the Machine
(SSL/TLS Server)

The SOAP, Internet Services (HTTP), IPP, and WebDAV ports use the HTTP server of the
machine.

The SSL/TLS protocol is used to encrypt the HTTP communications between a client and the
machine.

Note

•

If the certificate for the SSL server contains the V3 extension "keyUsage", "digitalSignature" must be
asserted. Refer to "How to check the certificate settings on Windows" (P.391).

To encrypt communications, either one of the device certificate is required: a self-signed
certificate or a certificate issued by another CA.

Note

•

By encrypting HTTP communications, communications data can be encrypted at the time of
printing using IPP (SSL encrypted communications).

Valid (certificate expires
soon)

The certificate is valid,
but expires within 1
month.

Invalid (before validity
starts)

The valid period of the
certificate is not started.

The validation
period of the
certificate is before
the time of the
machine.

Check the time when
the valid period of
the certificate starts.
Also check if the
time of the machine
is correctly set.

Invalid (validity expires)

The certificate expired.

The validation
period of the
certificate is after
the time of the
machine.

Check the time when
the valid period of
the certificate ends.
Also check if the
time of the machine
is correctly set.

Certificate issuer
unknown.

The certificate path is
not completed.

A CA certificate
necessary to
configure the
certificate path is
not imported.

Import all the CA
certificates of the
CAs included in the
certificate path.

Invalid

The certificate is invalid. The certificate has

been confirmed to
be invalid by the
validity check.

Use the valid
certificate.

Validity Check Failed

The validity check has
been failed.

The validity check
has failed for an
error such as a
network
communication
error.

Check the validity
check settings,
network settings,
and communication
of the machine.

Signature validation
failed.

The signature
validation has failed.

The certificate or the
signature is not
correct.

Check if the
certificate is correct.

Validity

Status

Cause

Remedy

Summary of Contents for ApeosPort-V C5580





























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-V C5580

Reviews:

Related manuals for ApeosPort-V C5580

Brands by name

Popular brands

Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Search results

Summary of Contents for ApeosPort-V C5580

Reviews:

Related manuals for ApeosPort-V C5580

Brands by name

Popular brands