Awards Maker 400
Installing Supplies – Instructions
Page 1: ...Awards Maker 400 Installing Supplies Instructions...
Page 2: ...dia underneath the print head with sticker side facing up z Adjust left and right media guides to ensure snug fit z Make sure the leading edge sits on top of the rubber roller To prevent waste do not...
Page 3: ...l Tip hold the bare roll with your left hand and supply roll with your right Wind the ribbon a few times by turning the bare roll clock wise z Insert the supply roll into the bottom holder by pushing...
Page 4: ...sure tap each release lever with your finger If it springs up the print head has not been properly closed Push down firmly on that side to lock z You re now ready to print using your VariQuest Design...
