Basler BE1-CDS220, Instruction Manual

Page: 446 / 476

B-2 Command Cross-Reference BE1-CDS220
An entry of x in the following tables represents multiple entry possibilities such as 0, 1, 2, or 3 for setting
groups or 43, 143, 243, etc. for virtual switches.
Table B-1. Miscellaneous Commands
ASCII Command Function HMI Screen
ACCESS[=<password>] Read/Set access level in order to change settings. N/A
EXIT Exit programming mode. N/A
HELP <cmd> or H <cmd> Obtain help with command operation. N/A
Table B-2. Metering Commands
ASCII Command Function HMI Screen
M Read all metered values. N/A
M-FREQ Read metered frequency. 3.1
M-I Read metered current in primary units (all phases). 3.1
∗
M-I[<phase>] Read metered current in primary units. 3.1
∗
M1 Read CT circuit #1 current primary or secondary
units (all phases). 3.1.1
∗
M1[<phase>] Read CT circuit #1 current primary or secondary
units. 3.1.1.1
M2 Read CT circuit #2 current primary or secondary
units (all phases). 3.1.2
∗
M2[<phase>] Read CT circuit #2 current primary or secondary
units. 3.1.2.1
MD Read differential currents (all phases,
compensated currents, operating current and
harmonics). 3.2
∗
MD[<x>] Read differential current. 3.2.x.x
∗
Multiple screens required.
Table B-3. Control Commands
ASCII Command Function HMI Screen
CO-<control>[=<mode>] Control operation. N/A
CS-<control>[=<mode>] Control selection. N/A
CS/CO-43 Control Virtual Switches 2.1.x
CS/CO-101 Control Breaker control switch 2.2.1
CS/CO-GROUP Control Group 2.3.1
CS/CO-OUTn Control Output n 2.4.1
Table B-4. Report Commands
ASCII Command Function HMI Screen
RA Report/Reset alarm information (logic, major,
minor, relay). 1.2
RA[<x>] Report/Reset alarm information. 2.1
RA-DIFF[=TRIG] Read/Trigger Differential Report Data. N/A
RA-LGC[=0] Report/Reset logic alarm information. N/A