Basler BE1-CDS220, Instruction Manual

Page: 138 / 476

6-20 Reporting and Alarm Functions BE1-CDS220
Figure 6-8. Reporting and Alarms Screen, Breaker Monitoring Tab
Table 6-10 lists the settings for the breaker status reporting function.
Table 6-10. Breaker Status Reporting Settings
Setting Range/Purpose Default
Breaker Closed Logic
Logic expression that is TRUE when the breaker is
closed (e.g., 52a logic)
0
Breaker Label 16 character alpha/numerical label (name) BREAKER_LABEL
SB-LOGIC Command
Purpose:
Read/Set Breaker Contact Logic
Syntax: SB-LOGIC[={breaker close logic},{breaker name}]
Comments: n =1, 2, 3, 4 for Ckt 1, Ckt 2, Ckt 3, Ckt 4.
SB-LOGIC Command Example:
Example 1. Set the relay to monitor input 3 so that when the input is false, the breaker is closed (52b
contact is wired to Input 3) and change breaker label to BREAKER_1.
>SB-LOGIC = /IN3,BREAKER_1
Retrieving Breaker Status and Operation Counter Information
The current breaker status can be read from HMI Screen 1.4.5, \STAT\OPER\BKR and from the ASCII
command interface using the RG-STAT or RG-BREAKER command. The paragraphs on General Status
Reporting in this section provide more information on this command.
The current value of the breaker operations counter register can be read from HMI Screen 4.3.1,
\REPRT\BRPTS\STATUS. Pressing the Edit key allows the user to enter a number into the register to
NOTE
The NOT symbol (/) is applied to the variable immediately following the symbol.