Basler BE1-CDS220, Instruction Manual

Page: 453 / 476

BE1-CDS220 Terminal Communication C-1
APPENDIX C
•
TERMINAL COMMUNICATION
This appendix provides instructions for configuring Windows

HyperTerminal and Windows

Terminal to
communicate with your BE1-CDS-220 relay.
WINDOWS

HYPERTERMINAL
Step 1: Click Start: Highlight Programs, Accessories,
Communications, HyperTerminal.
Step 2: Click HyperTerminal to open the folder.
Step 3: Select the file or icon labeled Hypertrm or
Hypertrm.exe. Once the program has started,
you will be presented with a series of dialog
boxes.
Step 4: Dialog Box: CONNECTION DESCRIPTION
See Figure C-1.
a. Type the desired file name, for example,
BE1-CDS220.
b. Click “OK”.
Step 5: Dialog Box: PHONE NUMBER
a. Click drop-down menu: CONNECT
USING
Select Direct To ComX, where X is the
port you are using on your computer.
b. Click “OK”.
Step 6: Dialog Box: COMX Properties
a. Make the following selections using
Figure C-2 as a guide:
Set the bits per second setting so that
it matches the setting of the relay. The
default baud rate of the relay is 9,600.
Set the Data bits at 8.
Set the Parity to None.
Set the Stop bits at 1.
Set Flow control to Xon/Xoff.
b. Click “OK”. This creates an icon with the
file name entered in Step 4 and places it
in the HyperTerminal folder. Future
communication sessions can then be
started by clicking the appropriate icon.
Step 7: Click File/Properties on the menu bar. Click
the Settings tab.
a. Make the following selections:
Check the Terminal Keys radio button.
Figure C-1. Connection Description Dialog Box
Figure C-2. COM Properties Dialog Box