Basler BE1-CDS220, Instruction Manual, Page: 271 / 476

BE1-CDS220 ASCII Command Interface 11-13
RF Command
Purpose:
Read/Reset Fault Report Data
Syntax: RF[-n/NEW][=0/TRIG] where n=record # or NEW = new records
Example: RF (displays a directory of all fault reports in memory)
RF-23 (view summary report for fault record 23)
RF-NEW (view summary report for newest fault record since RF=0 reset)
RF=0 (reset NEW fault counter)
RF=TRIG (Manually Trigger a fault record)
Reference: Section 6, Reporting and Alarm Functions, Fault Reporting
RG Command
Purpose:
Report General Information
Syntax: RG
Example: RG
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-101STAT Command
Purpose:
Report 101 status
Syntax: RG-101STAT
Example: RG-101STAT
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-43STAT Command
Purpose:
Report 43 status
Syntax: RG-43STAT
Example: RG-43STAT
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-ADDR Command
Purpose:
Report/Set COM1/COM2 Address for Polled Communications
Syntax: RG-ADDR[n][={com addr}] where n = 1 for COM1 or 2 for COM2
Example: RG-ADDR or RG-ADDR1=0 or RG-ADDR2=27
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-BREAKER Command
Purpose:
Report breaker status
Syntax: RG-BREAKER
Example: RG-BREAKER
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-DATE Command
Purpose:
Report/Set Date
Syntax: RG-DATE[={M/D/Y}] or RG-DATE[={D-M-Y}]
Example: RG-DATE=12/31/96 or RG-DATE=31-12-96 (Format set by SG-CLK Command)
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting
RG-GRPACTIVE Command
Purpose:
Report active group
Syntax: RG-GRPACTIVE
Example: RG-GRPACTIVE
Reference: Section 6, Reporting and Alarm Functions, General Status Reporting